Scaffold Board, Tube and Fittings

Compatible for use within traditional scaffold structures, they combine strength, low weight and low cost.

• Available in 450mm, and 800mm depths
• Available in 2m to 8m lengths
• Horizontal members manufactured to scaffold tube dimensions, allowing connection with traditional scaffold fittings
• High load bearing capacity
• Used largely to provide openings and bridges within a structure to spread the load through the scaffold
• They can be used in suspended and mobile platforms, birdcages, crash decks, large span bridging, temporary roofing and any structure where load is spread to achieve access where conventional scaffolding cannot meet the needs from the ground

A comprehensive and highly adaptive range of high quality products and systems for working at height and on-site. Designed to be user-friendly and cost-effective whilst meeting the most stringent safety regulations to protect workers and equipment from the risks associated with working at height.

• Designed to be fitted to steelwork at ground level and then craned into place, saving contractors both time and money
• Guardrail, toe board and netting in one product
• Hard-mesh coverage with impact absorbing capacity
• Lightweight, versatile system for speedy erection
• Automised manufacturing process for maximum strength and durability
• Adjustable in height
• Reinforced edges to prevent damage
• Wide range of attachments for every building application
• Designed and manufactured in compliance with

BS EN 13374 class A and B Wide range of attachments: Multi Mesh Barrier, Multifoot, Stair Attachment, Slab Edge Bracket, Multi Clamp, Steel Jaw Clamp and many more.

• Complements tube and fittings as well as system scaffold
• The bracket allows a two or three inside intermediate board platform to be constructed

• Galvanised steel products combine three loose components into one lightweight, robust and manageable item
• Telescopic inside cantilever, reducing from either three or two boards down to none
• Connected by simple wedge fastening
• Available in four board wide with wedge, five board wide with edge, four board only and five board only

The professionally designed freestanding system for flat roof applications, where no physical connection is possible.

• Only 4 basic components
• Ease of Assembly
• Temporary Installations
• Toe boards can be fitted if required
• Designed to minimise trip hazards
• Patented lifting shoe to allow roof surfaces to be redressed or repaired
• Fully galvanised
• Simple, Safe and maintenance free

• Klawz is the first EN 74 Class B fitting allowing the design of Double on Double scaffolding, also known as Tube on Tube
• Klawz spacing design results in the ledger and transom seating tube on tube allowing scaffold to be boarded out on a single level
• The Klawz fitting eliminates the requirements for separate Aberdeen transoms
• Transoms attached with Klawz fittings are suitable for tying a scaffold to a structure

• Designed to conform with the requirements of BS EN 12811–3
• Its unique node point allows the connection of up to four horizontals into one vertical
• Fully hot dip galvanised for minimal maintenance
• Manufactured to scaffold tube size, allowing connection to traditional scaffold fittings
• Simple and quick to erect
• Minimal components

• Modular system scaffolding that is simple to erect and easy to configure and customise
• Smart and reliable fastening mechanism, with a four-way wedge-stop configuration that delivers a solid bond between the braces
• Fast to assemble and disassemble, reducing time spent on the erection stage of the work without compromising on safety
• No formal training required due to the ease-of-assembly factor
• Versatile, cost-effective alternative to traditional scaffolding
• Range of accessories available

• Finest quality, heavy duty ladders, available in standard sizes from 3m to 10m
• Matched Scandinavian Whitewood stiles, finished with two coats of ladder varnish
• Hardwood rungs at 250mm centres
• Tie rods under every rung

• Tested to performance requirements of BS 2037 Class 1 Industrial
• Certified to BS EN 131
• Fully coated, inside and out, with aluminium-zinc for maximum corrosion resistance
• Coating is much more durable and resilient than paint or epoxy alternatives
• Standard sizes available; 3m, 3.5m, 4m, 5m, 6m, 7m and 8m
• Square, non-slip rungs, angled to provide flat climbing surface
• Oversize rubber feet allow use either way up

• Galvanised steel box section
• Long-lasting
• Heavy duty rubber feet
• Certified to BS EN 131
• Available in sizes 3m, 3.5m, 4m, 5m, 6m and 7m

• Layher Allround® Scaffolding is centred on the highly versatile Allround Connector
• The ‘rosette’ welded onto the upright component safely and securely accommodates eight individual connections
• Ledgers or transoms are connected at right angles with additional components then added at a choice of angles
• Installations are automatically centred and correctly located for safe assembly
• Fully compliant to BS EN 12811-1

• Fabricated from aluminium
• Easy to handle and install
• Can be erected in both parallel and alternative directions
• Stair base size 3.07m x 1.4m
• Permissible load 2.5kN/m²
• Conform to manual handling regulations
• Modular stair attachment
• Available in 1.5m and 2m lifts
• Complies to BS EN 12811-1

• Allows more efficient use of your plant and workforce, saving you time and money
• 50% more load carrying capacity than conventional towers
• Requires 50% less parts and reduced labour time
• Capacity of up to 15 kN/m2
• Uses standard Layher Allround® parts – enhancing component versatility and maximising cost effectiveness
• Complies to BS EN 12811-1

• Intended for both temporary and permanent stairway structures in public areas
• Typical applications are as road crossings during building work, as stairways inside buildings for the duration of the construction work, as a mandatory escape stairway tower or as a construction stairway tower
• For the events field, it has a high load-bearing capacity, allowing it to be used for accessing stands and stages
• Includes child-safety guardrail
• Permissible load 7.5 kN/m² with a stair flight width of 2.07m
• A height adjustment outside the 1.5m standard height dimension is achieved with five- or two-step stairway stringers
• Eight decks per standard stairway
• Complies to BS EN 12811-1

• All aluminium components that weigh less than 25kgs
• Can be easily and legally handled by one person
• Unique bolted cleat construction
• Eliminates all welds and therefore the potential for weld cracking and subsequent failure
• Easy maintenance – on-site if necessary
• Use with your own existing tube and fitting scaffolding
• Takes away the need for specialist dedicated system stair towers
• 1.5m and 2m lifts available to provide versatility
• Deep non-slip tread section provides a safe foothold in the worst of conditions
• Deep non-slip treads throughout
• Fully interlocking system
• Complies to BS EN 12811-1

• Provides a quickly erected, independent system scaffold unit from standard scaffold tube
• Available in three, four or five board widths
• Forged end flap
• Cost effective

• Fire retardant treatments to either Euroclass B or C
• Nail plates fitted on the face of the board to prevent splitting
• End bands embossed with your name and branding of your name into the timber
• Special board retaining clip available

• Non-slip textured surface
• Easy to clean and maintain
• Operates in temperatures as low as -20°C to 45°C

• Rubbish Chutes
• Loading Bay Gates, Aluminium and Steel
• Plastic Brickguards
• Gin Wheel and Rope
• Ladder Access Gate
• Sheetings and Fixings
• Debris Netting
• Tredda Plate
• Tube End Protectors / Fitting Caps
• Scafftags
• Steel Ladder Beams
• Ladder Hatch
• Corrugated Sheets
• Safety Netting
• Steel Quick Tread
• Spanners
• Safety Harness
• Tool Holder
• Stillage
• Fitting Bin
• Ladder Guard
• Scaffold Tie Fixings
• Safelinx Board Retainer
• Scaffold Lamp

• Quickly and easily installed on site
• Set up between 25° and 50°, users can carry small tools, equipment and materials in safety and comfort as treads will always be horizontal
• Fully comply with BS EN 12811, as Temporary Work Equipment for access between levels on scaffolding
• The Stairways come in six lengths, which can be joined and supported to offer a single run climb height of up to 7.5m
• There is a double handrail on both sides, which automatically adjusts to the correct height to meet the angle of the stairs
• The locking mechanism ensures the stability of the Stairway and keeps it at the correct angle
• The bottom of the stringers are shaped to prevent slipping
• 750mm wide, therefore permits occasional passing if required
• Can be folded flat for ease of transportation
• Manufactured in steel sections and has a durable galvanised finish as standard
• The treads have a coarse expanded metal surface for grip, which also clears muddy footwear in use

• Secures toe boards vertically
• Fully compliant with BS EN 12811-1 in relation to toe board loading requirements
• Does not damage the toe board
• Gives the completed working platform a professional, tidy and safe appearance

• Massive span capabilities
• Lightweight and high strength
• Roll-out assembly eliminates unprotected work at height
• Fully modular roofing system in a range of sizes will fit any project
• Fits on any scaffolding system or tube and fittings, maximising on-site flexibility and stock utilisation
• Integrated fixings, all without spanner or hammer, no loose fittings to drop
• Lightweight aluminum beams and bracing, easy handling at height without the need for a crane
• Individual bays easily opened, allows access for craned materials
• Minimal number of different parts, simple logical assembly and easy stocking
• Loose components eliminated, all parts snap together without bolts

• An all-aluminium solution for temporary access between levels in scaffolds or construction sites
• Available in five lengths to suit any level difference from 0.5m to 3.8m, with or without integral guardrails
• Folds flat for transport, easily assembled and automatically adjusts to a wide range of lift heights
• Can be used on tube and fitting, system scaffold, false work, on roofs, between building floors or on embankments
• Interchangeable top brackets for scaffold tubes, as well as floor slabs and timber joists
• Perfect for access to upper floors in new builds, requires no scaffolding
• Can be used on slopes, inclines and pitched roofs
• Steel reinforced feet with carrying handle
• Automatic lift height adjustment
• Sturdy locking device
• Compliant to BS EN 12811