Groundwork Equipment

An excavator progressively drives a Trench Sheet with the aid of a Driving Cap

Protects Trench Sheets and reduces damage cost

Full range of Driving Caps to suit individual Trench Sheet profiles

Ground Guards • Made from environmentally friendly 100% recycled plastic • Although lightweight, they are guaranteed unbreakable by vehicles of up to 120 tonnes • Ideal for safely manoeuvering heavy equipment around site with minimal disturbance to turf • Available with different tread patterns to suit a whole range of uses • Joining clips enable them to be quickly coupled together without tools

Sizes: 4' × 8' (1200 mm × 2400mm) weight 39kg 3' x 8' (900mm × 2400mm) weight 29kg 2' × 8' (600mm ×2400mm) weight 20kg 3' × 6’ (900mm × 1800mm) weight 22kg 2' × 6’ (600mm × 1800mm) weight 15kg

FastCover • Rapid, safe and simple pedestrian ground protection • Ideal for pedestrian walkways, indoor and outdoor event floors, temporary car parks, factory flooring and welfare compounds • Interlocking flanged edges, provides clean, safe and well protected floors in an incredibly rapid installation time • Unique add-on end ramp design minimises the possibility of trip hazards • Formed from entirely recycled raw material

Sizes: Length: 1200mm Width: 800mm Depth: 22mm or 43mm

MaxiTrack • 40kg mats can easily be handled without the need for specialist lifting equipment or crane hire • Heavy duty and incredibly strong, able to support loads up to 130 tonnes • Overlapping flanges provide maximum support, reduced slippage and mud suppression • Unique slotted joints to cope with heat expansion on large areas • Reversible tread patterns for multi-use, including octagonal threads designed for exceptional grip in any direction • Treads have 20 degree taper, and wide grooves for easy mud wash off • Tread lugs on top and bottom interlock with each other to make transportation safer • 25mm thick panels with 6mm tread on both sides • Lapped flange joints provide a rigidly supported continuous roadway for maximum stability

Sizes: Length: 1800mm Width: 900mm Core Thickness: 25mm Usable surface area: 1.62m Weight: 40kg

• Available in varying sizes, a revolution for wheelchair, disabled and utility construction access
• Manufactured from glass reinforced plastic, the products have no scrap value, thus eliminating on-site theft problems
• Will not warp, or delaminate in adverse weather conditions
• Designed for kerb and ridge access
• High non-slip surface – even in the wet
• Durable and lightweight
• High visibility colours with reflective markings
• Stows comfortably in most cars

Used in the construction of all types of ground slabs, roadways, foundations and drives. Available with either a true square or flexible edge ensuring a smooth radius bend. The forms are secured with up to five stakes, held in place by a simple wedge.

• Square Edged or Flexible
• Depths from 100mm – 300mm
• Stakes from 450mm – 900mm
• Stake Extractors
• Mould Oil
• The Road Forms are supplied with pins

Road Forms are used to provide an aligned edge when laying concrete and come complete with wedge and stake housing.

Sizes:

• Provide support to vehicles and plant crossing excavations
• Can be supplied in coated or uncoated finish
• Approved skid resistance surface and anchorage points to meet the Safety at Street Works and Road Works Act
• 8’ x 4’ x ½” (2400mm x 1200mm)
• 8’ x 4’ x ¾” (2400mm x 1200mm)
• Additional sizes are available to order

• Offers unprecedented versatility when covering trenches, manholes and excavations in utility, cabling and maintenance projects
• Compliant with the UK’s DETR Safety at Streetworks and Roadworks Code of Practice
• Moulded from a single piece of glass reinforced composite
• Slip resistant surface and chamfered edges to prevent tripping
• Underside has ribbed framework for added strength
• Can take the distributed weight of a vehicle of up to 2000kg
• Can be matched to any required colour (minimum quantities apply)
• Can be embossed with your company name; or logo, for corporate identity (sales stock only)
• Lighter than steel cover
• Stronger than a wooden plate
• Suitable for trenches up to 700mm wide
• Designed and manufactured in the UK

Sizes:

• 1200mm x 800mm
• 1200mm x 1600mm

Trench Sheets are available in one profile and offer different sizes in length. They are generally specified to support the vertical faces of most small to medium sized excavations. Designed to be handled by excavators using a Quick Release Shackle and connected via the handling hole provided at one end of each sheet. The sheets are usually installed using the ‘dig and push’ technique, whereby the excavator progressively drives the sheet with the aid of a Driving Cap, which prevents damage to the Trench Sheets.

Available from stock, in four sizes. Trench Struts feature clawed base and head plates, which are designed to grip the trench lining and hold it tightly in place to prevent collapse.

• Rugged construction gives added strength and reduces the cost of repairs
• The retaining links on the pins and inner tube prevent loss and accident – keeping the strut in full service
• The 75mm x 75mm end plates spread the load, thus reducing damage to walings
• All struts are painted as standard, other colours are available on larger quantities
• Trench Strut 0: 300mm – 470mm
• Trench Strut 1: 470mm – 690mm
• Trench Strut 2: 690mm – 1090mm
• Trench Strut 3: 1020mm – 1680mm

• A system of interlocking, ductile iron mini road plates
• Traffic can flow immediately and in safety
• Minimal traffic delays, resulting in reduced vehicle emissions
• Can be easily handled by peratives on site
• No temporary tar - no transport, disposal or recycling costs
• Maintain traffic flow and speed
• Temporary reinstating eliminated
• Increase productivity
• Reduce costs
• Locks securely over trench
• Integrated skid resistant surface